Mabey's QuickBridge® is a proprietary steel bridge system based on fixed span lengths that allow installation in minutes with minimum erection skill crews. Versatile in application, Mabey QuickBridges® are available:

• For temporary or permanent applications
• In single or multi-span roles for bridges, ramps or platforms
• For public highway or site use
• In single, dual or wider roadway arrangements
• In rollover or flat top form
• In footbridge form
• Complete with anti-skid surfacing

Installation

Quickbridge® units are normally supplied with railings and anti-skid surfacing. The units can be lifted directly from the delivery vehicle onto pre-prepared foundations minimizing installation time and labor requirements.

Mabey's "off-the-shelf" solution for short span applications.
The fixed length QuickBridge®...

• comes in 5.65' (1725mm) wide units; the bridge can be made wider or longer by simply adding units
• units come in 20, 30, and 40 ft. (6, 9, and 12m) lengths 
• builds rapidly
• most QuickBridges® are comprised of only two or three sections and can be installed with a minimal crew in under an hour. 
• designed to meet AASHTO HS25-44 load specifications

Its modular design also makes it suitable for a variety of applications:

Single-lane QuickBridge® makes ideal footbridge.	The QuickBridge® can be used in temporary or  permanent applications
QuickBridge® is used with Mabey Mats.	QuickBridge® can be used on the golf course.

Trench Crossing Units
Crossing units come in Rollover and Flat Top.

Rollover Units
These units enable greater widths of trench to be crossed than road plates. They are available with a span of 14.8ft or they may be designed and manufactured to suit the customers' requirements.

Rollover Units Size (ft) Weight (lbs) 14.8 x 5.65 1763

Flat Top Units
These units are used to cross trenches as well. They come in lengths of 7.4ft or 14.8ft. A non-skid surface is available on all size units.

Flat Top Unit Size (ft) 7.4 x 3.4 14.8 x 3.4